System Messages; Manual Test: E-Mail, Fax Or Sms Sending; Sending Automatic Reports (Only For Xweb With Scheduler) - Emerson Dixell X-web300 Operation Manual

2.3.14 SYSTEM MESSAGES

XWEB is able to send a complete report of the past activity. The report can be sent both automatically and
manually according to an event calendar defined by the user (see Scheduler §). Moreover if the system is
working out of the standard operative range (i.e. cpu temperature), automatically a report will be sent out.
This tool can also be used when the user wants to test the system setup, in fact it is possible to test for
example the e-mail: XWEB will send an e-mail to the selected receiver.
Enable system notification: enable/disable reporting activity
Enable alarm relay: enable/disable alarm relay when an alarm occurs (high temperature, a faulty RS485
hardware and blackout)

2.3.14.1 MANUAL TEST: E-MAIL, FAX OR SMS SENDING

Select the user in the "Receiver" drop down menu, then select the message type you want to receive. The
calendar option let you choose whether to filter the messages according to the calendar (ref. 3.3.5) or not. By
pressing "Send message" the system tries to send the message.

2.3.14.2 SENDING AUTOMATIC REPORTS (ONLY FOR XWEB WITH SCHEDULER)

To receive an automatic report you must tick "Enable system notification" (in the above window), then go to
"Configuration" then "Scheduler". Choose "Event" and finally "Add system event". The following window will
appear:
In the above example the system will send a report everyday at 09:00 a.m.
For an in deep explanation on Scheduler, please see §3.3.3Scheduler
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 34/114