Emerson Dixell X-web300 Operation Manual page 40

File Submenu:
 SAVE
This function allow you to save the changes done till now. Beware that the system can not go back to a
previous save, only the last one is available.
 PRINT
Execute the operation of printing your configuration using your PC.
 EXPORT TO FILE
Execute the operation of saving the configuration on the hard drive of your PC.
SCHEDULER ENABLED

Enabling the tick, the scheduler is enabled on every condition.
 SCHEDULER ENABLED ON OPENED DIGITAL INPUT
Enabling the tick, the scheduler is enabled on open digital input status.
 SCHEDULER ENABLED ON CLOSED DIGITAL INPUT
Enabling the tick, the scheduler is enabled on closed digital input status.
EXIT

Closes the Scheduler.
Class Submenu:
 C C
REATE LASS
By using this menu it is possible to create a new class.
Fill in "Class Name" field, then pick up a Category. Wait for the complete list of the controller. Check all the
controllers you want to send a command and push "Add Command event". If you want to manage a time-
scheduled printout, please choose "Add printing Event".
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 40/114