Once a button is password protected, each time someone push it, this window will appear:
If you insert a wrong code, the field reset itself. You can continue inserting a code until you press "Exit".
G
RID
It helps you to align all the objects you want to place in the layer. By choosing this option you can also select
the grid colour.
3.5.5.1.1
DIGITAL INPUT SENDING COMMANDS
It is possible to send a set of command to a specific range of controller. The user must setup the "polarity" of
the contact. This can be achieved by means of "Close contact setup" or "Close contact setup".
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx
XWEB500/300
77/114