Emerson Dixell X-web300 Operation Manual page 88

graph.
Click, with the left button of the mouse, into the top bar of the information of graph itself.
To zoom in you just have to keep pressed to left mouse button.
To zoom out you just have to keep pressed to right mouse button
Zoom into an area

To enhance the portion of a displayed graph click and keep pressed the left button of the mouse on the
hypothetical top-left corner of the area to zoom.
Than drag the mouse down to the low right corner to complete the window to zoom. If the selected area
have not the proper dimensions click one time outside the area itself to abort the zoom, then repeat the
operation to select the area to zoom.
Otherwise, if you click one time with the left button inside the selected area, immediately this area will be
zoomed to the borders of the graph.
Back to the original size

To resize the graph to its original dimension select from the "Scale" menu the "Reset Size" option.
Manual Scale

The first time the graph is displayed with an "auto scale" function defined by highest and lowest peek and
the whole interval time selected.
Do define a personal scale of the graph view select from the "Scale" menu the "Manual Size" item.
The next windows will show the X and Y scale limits that the user can adapt to his requirement.
Graph Synchronism

When a instrument information are displayed into 2 or more graphs, all the horizontal time axes are
synchronised together.
By zooming only one of the graphs the result is that the other are no more synchronised with the new
time base.
To keep all the graph synchronised you can use the "Sync" function from tools menu
Select it for each graph that has to be included into the synchronism function, then zoom into one of
them. You can notice that all time axes are now synchronized
Graph info

The graph information area is immediately displayed with the graph itself.
If necessary move or drag it where it does not cover part of the interested area.
To close the information window click on its crossed button.
To make it appear again select "Legenda" from the "Tools" menu.
 Save a graph format
This function provides to save the data of the displayed graph into the hard disk of the client computer
connected to XWEB.
To start the operation select "Save" from the "Tools" menu.
After that you can proceed by using the typical saving method of Windows operative system, remember
to assign a proper name and origin of the data. On the bottom left side of the window ypou can decide
which data format to save: text (TXT) or html.
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 88/114