Date / Time; Device Menu - Emerson Dixell X-web300 Operation Manual

XWEB 500 unit let you setup:
-> Language
Identification
Delete archive
Network
Modem
Dial up
e-mail
SMS
FAX
Printer
 Delete archive completely empties the recorded temperatures and alarms. It empties the
corresponding database
 Network is for the setup of the network. The system must be rebooted to apply a new setup.
 Modem is for the modem setup.
 Dial up is to setup the dial-up connection
 e-mail is for the e-mail setup. The option "Testing e-mail" let you send a test e-mail.
 Printer is to setup the USB printer. The setup via web-browser is strongly suggested for this entry.
2.2.1.1.1

DATE / TIME

To setup, date, time and timezone
2.2.1.1.2

DEVICE MENU

-> Add
Delete
Setup
Recording interval
To add a new device the system must be in STOP mode (i.e. RS485 reading must be turned off).
 Add is to add a new device. Only 100 devices can be added [the maximum number of devices may
vary depending on the considered model]
 Delete is to remove a device.
 Setup is to configure a device according to the following parameter:
Address: ADR parameter
Name: name of the controller
Interval: recording interval
Read: enable data reading for the selected controller
Record: enable data recording for the selected controller
RTC: enable real time clock synchronization
Print: enable the printout for the selected controller
 Recording interval is to setup the interval between two samples of data. Only 1 category can be
setup in the LCD. Other categories can be added by means of the WEB user-interface.
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 18/114