Emerson Dixell X-web300 Operation Manual page 72

In the output section if you choose "Motion" a new window will appear:
User has to choose the rectangle property:
Label
BG Rectangle background colour
FG Rectangle foreground colour
PX Line thickness in pixels
With the first left button mouse click you place the control in the layer, then point to the top left corner of the
rectangular area, hold down left mouse and drag the pointer to the bottom right corner. Release left mouse
button move the rectangular area to centre it and push left mouse button once. In the following example you
can see a compressor rounded with a blue/red rectangular area. We also used "load 1" icon:
Left mouse click here
Hold down left mouse button
and drag the pointer to the blue
arrow.
 S A
ENSIBLE REA
It allows to define a particular zone that can be linked to a layer. Mouse pointer change itself to a finger-icon
when it is moved on these areas. The following window will appear:
It is possible to choose a transparent area or a coloured one. We suggest to use the first one when the
background is an image. The procedure is the same as the one highlighted above in the motion rectangular
area.
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx
Meaning
When you reach the blue
arrow release the left mouse
button. One more left mouse
click to place.
XWEB500/300 72/114