Recording Interval; Rtc Syncronization; Scheduler (Only For Xweb500Din) - Emerson Dixell X-web300 Operation Manual

3.3.2.2

RECORDING INTERVAL

Define the
recording
intervals of the
instruments to
log the data into
the archive.
Eg: "Standard = 15min.", "Fast = 3min.".
XWEB can define different log intervals for different instruments when the log frequency is not the same for
all the instruments.
To insert a new item

Click "New" and then into the field "Name". Insert the word or the words that more represents the
application;.
To modify an existing item

Click on the name-field and modify it, then press "Modify";
Click the "Set as Default " if necessary;
To delete one of the item of the list

Click on "Cancel";
Confirm the operation if necessary. Wait the screen refresh.
3.3.2.3

RTC SYNCRONIZATION

In this section user can decide how often to
synchronise the controller equipped with a real time
clock.
Interval is expressed in hh:mm. The maximum
value accepted is 12:00. It means that every 12
hours a synchronise-command is sent to the
controller. To enable a controller, the user has to go
to the "Devices" page and check the "RTC Sync"
checkbox.

3.3.3 SCHEDULER (ONLY FOR XWEB500DIN)

This is a powerful tool for managing category and repetitive commands. Now it is possible to send command
to a set of controllers and have a "visual" chart. This feature, for instance, is very useful to avoid command
time-overlap.
To start the "Scheduler", use the drop-down menu "Configuration", then "Scheduler". This window will appear
(Java is required):
On the bottom there is a timeline (00:00 to 24:00), each hour is marked with a vertical line. This main window
is very useful to build a complete time table in a very easy and fast way.
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 39/114