Emerson Dixell X-web300 Operation Manual page 63

Send the commands to devices

From the run time page you are allowed to interact with the instruments by sending commands to them.
The user is requested to select the instrument or the instruments to which the command has to be sent.
To do that click into the "Sel." box to select the instrument.
On the right top side of the browser border will appear a Toolbar which contains the Commands button
and the possibility of selecting or deselecting all the instruments together.
To define the command to send click on "Commands" and immediately a choice list will appear.
For multiple selection of some or all instruments the available commands will be only the common
commands among the instrument selected.
Select the command and click on "Send" button. Before proceeding a message box will tell you how
many instruments are involved.
The popup box also shows, with a blinking message, the status of the operation just executed and then
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 63/114