Devices Menu; Single View - Emerson Dixell X-web300 Operation Manual

3.5 DEVICES MENU

In this menu you can find all the web pages that allow the final user to interact with the controllers connected
to the RS485.

3.5.1 SINGLE VIEW

Select SINGLE VIEW to show all the data corresponding to a selected instrument. You will be informed
about probe values, digital inputs, device status, alarms for all the time you are connected.
 How to select a device and show the data
The devices can be selected using the Device filter in order to reduce the number of items of the search.
From the "Device filter" roll down menu select the category to which the instruments belong to. Then,
under the "Select a device" menu select the instrument you are interested in.
After some seconds the whole situation of the instrument will be loaded and displayed. The information
is divided in horizontal rows such as analogue inputs, Set points, digital inputs, device status, outputs
status, alarms and commands. A grey label means a function not active at that moment, on the contrary
a blue label means an activated function.
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 59/114