2.2.1.1.3
ALARM MENU
Alarm management by means of the LCD can setup only 1 user. To add new user please use the WEB
user-interface
->
Delay
Accumulation
Send FAX: Si/No
Send e-mail. Sì/No
Send SMS: Sì/No
Receiver(s)
Relay
Delay is to filter the alarms. If an alarm lasts less than the delay, XWEB 500 only records it in the
alarm log. If it lasts more than the delay, XWEB 500 will send it according to the accumulation time.
Accumulation time let you group together different alarms that belongs to the same level. Only one
alarm message will be sent: inside this main message all the others will be added.
Send FAX enables fax sending
Send e-mail enables e-mail sending
Send SMS enables SMS sending
Receivers let you setup the default receiver's information:
Default name can be modified by pressing ENTER
o
FAX 1: first fax number
o
FAX 2: back-up fax number
o
E-mail: e-mail address
o
SMS: mobile phone number
o
Relay let you setup the ALARM1 and ALARM2 relays:
ALARM1: enable/disabled
o
ALARM2: enable/disabled
o
BUZZER: enable/disabled the buzzer
o
2.2.1.1.4
PRINTOUT
Two different type of printouts are available.
->
Automatic printing
Manual printing
2.2.1.1.4.1 Automatic printing MENU
->
time
Print Data. Yes/No
Print alarms. Yes/No
Time is to setup the time of the day a printout is automatically printed by the XWEB500
Print Data is to print the recorded temperatures
Print Alarms is to print the list of the alarm
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx
XWEB500/300
19/114