Internet Connection - Emerson Dixell X-web300 Operation Manual

2.1.7.3

INTERNET CONNECTION

It is necessary a STATIC IP address for the XWEB which is normally assigned by the Provider of your
internet services.
The Internet connection allows XWEB to be reached from all PC-clients. Insert the net address assigned by
the administrator into the Browser address bar. Bookmark the address with personalised name for the future
connections.
Ask your provider for more details about the rent of a static IP.
This the internet system requirements for the best result:
Wide band connection.

 At least 1 static IP addresses for the XWEB.
The internet connection is established through a device called Router that receives and sends the data as
interface between an Intranet and Internet. The Provider also assigns the address of the router that is called
IP WAN.
Remember that the default value of the IP of the XWEB is: 192.168.0.150.
Depending on the contract the Provider can also supply the router, otherwise the user can buy it separately.
REMEMBER: ask qualified personnel for the router installation by using this information:
Used ports that are mapped to the LAN side:
 22 (used for SSH connection)
 80 (used for the Error! Hyperlink reference not valid. access)
The above ports are all related to the XWEB IP address 192.168.0.150.
While the ports on the WAN side are:
 http (To access the XWEB)
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 16/114