Device Configuration; Select A Device - Emerson Dixell X-web300 Operation Manual

3.3.6 DEVICE CONFIGURATION

The configuration of the devices allows to assign the appropriate monitoring system attributes.
The configuration is subordinated to the manual or automatic search procedure to create a list of the
available instruments.
For each kind of device XWEB will show only the specific information of the controller itself and the attributes
of the available digital and analogue inputs of the instrument. Only this part of configuration admits the
association of the categories previously defined such as the alarms, typologies and time recoding.
If during the configuration it is necessary to use a category to associate to a new feature of the instrument
but the category it is not present, the user can step back into the Categories menu, create the new category
and then restart with the device configuration.
3.3.6.1

SELECT A DEVICE

Please go to "Configuration" -> "Devices" roll-down menu. This window will appear:
By using "Device" drop-down menu you can select which controllers to show.
If the instrument has not been already renamed the identification name is: "New_Model-name" where:
"New" means that the name has been assigned automatically by the system;

 "Model-name" define the instrument model.
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 55/114