Delete Data; Display The Graphs With Local Pc - Emerson Dixell X-web300 Operation Manual

a * is used, the export is performed for all active devices.
EXAMPLE 1:
3d 3600
*
It exports the data of all the devices for last 3 days with a sampling time of one hour
EXAMPLE 2:
1d 120
1,3,5
It exports the data of device with address 1,3 and 5 with for last day with a sampling time of two
minutes
Place the USB pen drive on XWEB USB port and wait till the end of process is ended. If the USB

Pen is provided with a LED, it'll blink during the data transfer so wait till the LED is always ON to be
sure that the transfer is correctly ended.
Extract the USB pen from the XWEB and place it on your PC to see the data.

1. for each exported device all the enabled values are exported
2. there is a file for every device. The filename is related to the name of the device;
3. the files are placed on a directory named export_AAAAMMGG-HHMMSS and builded
following actual date and hour;
4. the data inside of the file are separated by "|" char in order to be quickly importable on Excel
or Open office calc;
5. First line of each file contains the name of the values separated by the "|" char;
An example of file is the following:
Date/Time|Status|Room (Pb1)|Evaporator (Pb2)|Set Point|On / Off|Defrost|Keyboard|Energy Saving|Low Value Pb1|High Value
Pb1|Error Pb1|Error Pb2|Open Door|External Alarm|EEPROM Failure|Defrost|Light|Fan|Cooling|Door Switch|Generic Alarm|
21/01/2010 13:32:41|4|
21/01/2010 13:47:48|4|
21/01/2010 14:02:57|4|
21/01/2010 14:18:03|4|
21/01/2010 14:33:13|4|
21/01/2010 14:48:21|4|
21/01/2010 15:03:29|4|
21/01/2010 15:18:37|4|
21/01/2010 15:33:45|4|
21/01/2010 15:48:54|4|
21/01/2010 16:04:02|4|
21/01/2010 16:19:09|4|
21/01/2010 16:34:16|4|
21/01/2010 16:49:26|4|
21/01/2010 17:04:35|4|
21/01/2010 17:19:44|4|
21/01/2010 17:34:51|4|
21/01/2010 17:50:01|4|
21/01/2010 18:05:09|4|
21/01/2010 18:20:19|4|
21/01/2010 18:35:29|4|
21/01/2010 18:50:36|4|
21/01/2010 19:05:45|4|
21/01/2010 19:20:52|4|
21/01/2010 19:36:00|4|
After having performed an export, in order to perform another operation it's necessary to remove and

re-insert the USB pen.

3.7.5 DELETE DATA

To remove unwanted data, go to "data" -> "Graphs". Here from the drop-down menu "Actions" choose
"cancel device data". Beware, this will remove all data recorded from the controllers.

3.7.6 DISPLAY THE GRAPHS WITH LOCAL PC

You can also display the graphs without connecting to a remote XWEB. First you need to save locally a
graph(s) (see chapter §3.7.1Display the graphs "Save a graph format" section). If this is the first time you
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
0.0| 0| 2.0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|
XWEB500/300 92/114