Manual Printing Menu; Password - Emerson Dixell X-web300 Operation Manual

2.2.1.1.4.2 Manual printing MENU

-> Alarm
Data
XWEB500 Setup
Device(s) Setup
 Alarm is to choose between the current alarm list and the recorded alarm list
 Data is to choose the recorded temperature in the archive
 XWEB500 setup prints the setup of the XWEB500 (network, receivers, users, etc...)
 Device(s) Setup prints the setup of the controllers
2.2.1.1.5

PASSWORD

The management of the user by means of the local LCD is different from the one by means of the WEB user
interface. Security management is turned off by default.
-> Users' permissions: Yes/No
When users' permission is ON, a password for each user must be set:
-> Users' permissions: Yes/No
Administrator
User 1
User 2
User 3
User 4
Please select the Administrator and assign it a password. Automatically it appears "Password:*". Press
ENTER to modify it.
Please select user 1 and assign it a password. It is possible to modify the following options:
-> Send command
Global command
Modify setpoint
Modify unit
Modify time
Modify devices
Modify alarm
Alarm reset
 Send command is to send a command to the controller
 Global command is to send a global command (if available)
 Modify setpoint let you modify the setpoint of a controller
 Reset alarm to reset an alarm (buzzer and relays)
When the user insert the password the system grant him complete access for 1 minute only. After this
timeout the user must insert the password again.
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 20/114