Parameters - Emerson Dixell X-web300 Operation Manual

3.5.3 PARAMETERS

The Parameter function allows management of the parameters of a selected device. The parameters can be
displayed and modified. From the Home Page, select the "Parameters" item from the "Devices" menu. From
the "Actions" select one of the following functions:
Load from Device:
Load from File:
Write on Device:
Write on Devices:
Save on File:
To show the parameters of a device select "load from device" from the "action" menu:
Use the filter mask to limits the range of the device selection:
DEVICE
TYPOLOGY:
Select a Device:
Select a Group:
Select "Menu":
After filling the filter mask, click on "Read" button to load the parameter from the instrument to the client pc.
The loading time depends on the number of parameter selected.
The parameter table is defined by these columns:
Label:
The parameter label as described into the instruction manual of the instrument itself;
Description: Description of the parameter function;
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx
 to load and display the parameters from a device;
to load and display the parameters from the Hard Disk of the Client PC

 to updated the displayed parameters into the selected device;
to updated the displayed parameters into the selected devices

to save the displayed parameters into the Hard Disk of the Client PC.

To filter among the different typologies ("All" includes all the instrument);

 To select the desired instrument;
To defines only a limited group of parameters to load;

 To defines which is the parameter level to use (Pr1, Pr2, All).
XWEB500/300 65/114