Emerson Dixell X-web300 Operation Manual page 3

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
WARNING: Use only modems supported by this monitoring unit. Dixell S.r.l.
can accept no responsibility for possible damage due the usage
of not supported modems.
WARNING: Dixell S.r.l. reserves itself the right to alter this manual without
notice. The last version available can be downloaded from the
website. Dixell Srl reserves the right to change the composition
of its products, even without notice, ensuring the same and
unchanged functionality.
WARNING: This manual describes XWEB300D/XWEB500D/XWEB500
functionalities. Special cases are clearly specified. Hereby
instructions refer to firmware version 2.2 or previous.
WARNING: This controlling and monitoring unit is compliant with standard
EN 12830 if it is used together with probes that are compliant with
standard EN 13485
WARNING:
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE
SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS PRODUCT IS INTENDED FOR USE INSIDE OF
ELECTRICAL PANEL ONLY
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO
ALERT THE USER
UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE
PRODUCT'S ENCLOSURE
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT
MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE.
XWEB500/300
PARTS INSIDE,
TO THE PRESENCE
THAT MAY BE
OPERATING
REFER
OF
OF
AND
3/114