Emerson Dixell X-web300 Operation Manual page 42

The various controls on the form allow the functioning described below:
Fast Selection listbox: allows an automatic selection of first value of each device on selected class in
o
order to obtain as fast as possible an HACCP printout (for example);
Activation Time field allows to decide when the printing or the FAX or email sending activities will be
o
performed;
The Printout Name field has to be used to a "title" for your printout or in general for your event;
o
Realtime printout is a printout of all the values that are sampled at Activation Time;
o
Archive: allows to print or send an email with the data that are stored on XWEB memory starting from
o
Activation time and coming back of back interval quantity of time (up to 48 hours) with Interval (sampling
time). The Interval sampling time can be used only if the Extended check box is selected, otherwise the
sampling time is automatically evaluated dividing the back interval in 6 samples. Switching the printout
between Extended or not, the layout of the printout will change accordingly to the layout that can be fill
the page better;
Headers: in order to give the possibility to customize the printout, it's possible to use the Headers
o
section. In this way, a user defined text can be added at the top and at the bottom of the printout;
Print copies field allows to print more than one copy at time;
o
FAX/EMAIL group box allows to send an EMAIL or a FAX depending on the receivers that have been
o
configured on alarm section. In case of sending an email, there is also the possibility to receive data as
attachment with CSV (comma separated value) or Text format;
 E C
DIT LASS
Use this menu to modify an existing class.
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 42/114