Alarm Typology Management - Emerson Dixell X-web300 Operation Manual

Modify the appropriate fields.
Click on "Modify".
To delete an item

Select the user to delete.
Click on "Cancel".
 To delete all the items of the list
Click on "Cancel All";
Confirm the operation if necessary. Wait the screen refresh.
 To reset the form
Click on "new"
 To use the on-board buzzer
Click on "Buzzer". If the option is unchecked, during an alarm the buzzer will not be activated.
3.3.4.4

ALARM TYPOLOGY MANAGEMENT

The alarm typology list, designed by the user, groups the common alarm features of the instrument into an
unique definition. For instance all the temperature alarms that are not important can be defined by a typology
named as "Normal Alarm" while the temperature alarms of the frozen food can be identified by the typology
"Severe Alarm".
The user can assign a typology name for the desired alarm event such as: High temperature, low
temperature, High or pressure, open door, compressor oil, Frozen food, etc...
The user can define the accuracy of the alarm description
Each typology can define the following:
One of the alarm level previously defined to send the alarm.

 The Delay time that defines the minimum duration of alarm. The alarm must be longer to be
computed, otherwise the system will only record the event in the alarm historical list.
The accumulation time that defines the time when the alarm will be sent. This time will be counted

only if the alarm lasts more than its delay time.
For each alarm the user can insert the appropriate word(s) that represent(s) the alarm transmission.

To inset a new Alarm typology

Click into the "Name" and insert the appropriate word(s) to describe the alarm typology.
Assign the alarm level procedure under "Level".
Define the "Accumulation" time and the minimum activation time or "Delay" of the alarm.
Insert the appropriate message header into the corresponding fields.
To modify the item

From "Selection" find the desired item.
Change the wrong description.
Click on "Modify".
To delete an item

Select the item to delete.
Click on "Cancel".
To delete all the items of the list

Click on "Cancel All";
Confirm the operation if necessary. Wait the screen refresh.
To reset the form

Click on "new"
1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 50/114