Concentrator File; Action; Tftp Server; Tftp Server File - Cisco VPN 3000 User Manual

Concentrator File

Enter the name of the file on the VPN Concentrator. This filename must conform to the 8.3 naming
convention.

Action

Click the drop-down menu button and select the TFTP action:

TFTP Server

Enter the IP address or hostname of the remote system running the TFTP server. (If you configured a
DNS server, you can enter a hostname; otherwise, enter an IP address.)

TFTP Server File

Enter the name of the file on the remote system. This filename must conform to naming conventions
applicable to the remote system. Do not include a path; the configuration of the remote TFTP server
determines the location (path) of the file.
Caution:
If either filename is the same as an existing file, TFTP overwrites the existing file without asking for
confirmation.

OK / Cancel

To transfer the file, click OK . The Manager pauses during the transfer, which may take a few moments;
please wait for the operation to finish. The Manager then displays either a Success or Error screen; see
below.
To cancel your settings on this screen, click Cancel . The Manager returns to the main Administration
screen.
VPN 3000 Concentrator Series User Guide
GET << = Get a file from the remote system; i.e., copy a file from the remote system to the VPN
Concentrator.
PUT >> = Put a file on the remote system; i.e., copy a file from the VPN Concentrator to the remote
system.
Administration | File Management | TFTP Transfer
14-33