Table of Contents
Advertisement
Inbound RIP
This parameter applies to RIP messages coming into the VPN Concentrator. It configures the system to
listen for RIP messages on this interface.
Click the drop-down menu button and select the inbound RIP function:
Outbound RIP
This parameter applies to RIP messages going out of the VPN Concentrator; that is, it configures the
system to send RIP messages on this interface.
Click the drop-down menu button and select the outbound RIP function:
VPN 3000 Concentrator Series User Guide
Disabled
= No inbound RIP functions; i.e., the system does not listen for any RIP messages on this
interface (default).
RIPv1 Only
= Listen for and interpret only RIPv1 messages on this interface.
= Listen for and interpret only RIPv2 messages on this interface.
RIPv2 Only
RIPv2/v1
= Listen for and interpret either RIPv1 or RIPv2 messages on this interface.
Disabled
= No outbound RIP functions; i.e., the system does not send any RIP messages on this
interface (default).
RIPv1 Only
= Send only RIPv1 messages on this interface.
= Send only RIPv2 messages on this interface.
RIPv2 Only
RIPv2/v1 compatible
= Send RIPv2 messages that are compatible with RIPv1 on this interface.
Configuration | Interfaces | WAN Card in Slot N | Port A B as T1 or E1
3-19
Hide quick links:
Advertisement
Table of Contents
