Configuration | System | Servers | Ntp | Hosts | Add Or Modify; Ntp Host; Add Or Apply / Cancel - Cisco VPN 3000 User Manual

Configuration | System | Servers | NTP | Hosts | Add or Modify

These screens let you:
Figure 5-20: Configuration | System | Servers | NTP | Hosts | Add or Modify screen

NTP Host

Enter the IP address or hostname of the NTP host (server); e.g., 192.168.12.34 . (If you have
configured a DNS server, you can enter a hostname in this field; otherwise, enter an IP address.)

Add or Apply / Cancel

To add this host to the list of configured NTP hosts, click Add . Or, to apply your changes to a configured
NTP host, click Apply . Both actions include your entry in the active configuration. The Manager returns
to the Configuration | System | Servers | NTP | Hosts screen. Any new host appears at the bottom of the NTP
Hosts
Reminder: To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To discard your entry, click Cancel . The Manager returns to the Configuration | System | Servers | NTP | Hosts
screen, and the NTP Hosts list is unchanged.
VPN 3000 Concentrator Series User Guide
Add a new NTP host to the list of configured hosts.
Modify a configured NTP host.
list.
Configuration | System | Servers | NTP | Hosts | Add or Modify
End of Chapter
5-21