Ospf Authentication; Ospf Password; Apply / Cancel - Cisco VPN 3000 User Manual

Enter the delay as a number from 0 to 3600 seconds. The default is 1 second, which is a typical value
for LANs.

OSPF Authentication

This parameter sets the authentication method for OSPF protocol messages. OSPF messages can be
authenticated so that only trusted routers can route messages within the domain. This authentication
method must be the same for all routers on a common network.
Click the drop-down menu button and select the authentication method:

OSPF Password

If you selected Simple Password or MD5 for OSPF Authentication above, enter the appropriate password or
key in this field. Otherwise, leave the field blank.

Apply / Cancel

To apply your settings to this interface and include your settings in the active configuration, click Apply .
The Manager returns to the Configuration | Interfaces screen.
Reminder: To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To discard your settings, click Cancel . The Manager returns to the Configuration | Interfaces screen.
VPN 3000 Concentrator Series User Guide
None = No authentication. OSPF messages are not authenticated (default).
Simple Password = Use a clear-text password for authentication. This password must be the same for
all routers on a common network. If you select this method, enter the password in the OSPF Password
field below.
MD5 = Use the MD5 hashing algorithm with a shared key to generate an encrypted message digest
for authentication. This key must be the same for all routers on a common network. If you select this
method, enter the key in the OSPF Password field below.
For Simple Password authentication, enter the common password. Maximum 8 characters. The
Manager displays your entry in clear text.
For MD5 authentication, enter the shared key. Maximum 8 characters. The Manager displays your
entry in clear text.
Configuration | Interfaces | Ethernet 1 2 3
3-13