Vpn Concentrator Leds (Front) - Cisco VPN 3000 User Manual

A
Errors and troubleshooting

VPN Concentrator LEDs (front)

LED Indicator (Front)
System
The LEDs below are present only on Models 3015–3080
Ethernet Link Status
1 2 3
Expansion Modules
Insertion Status
1 2 3 4
Expansion Modules
Run Status
1 2 3 4
Fan Status
Power Supplies
A B
CPU Utilization
Active Sessions
Throughput
A-10
Green
Power on. Normal
Blinking Green (Model
3005 only) = System
is in a shutdown
(halted) state, ready to
power off.
Connected to network
and enabled.
=
Blinking Green
Connected to network
and configured, but
disabled.
SEP module or WAN
interface module
installed in system.
SEP module or WAN
interface module
operational.
Operating normally.
Installed and operating
normally.
This statistic selected
for usage gauge
display.
This statistic selected
for usage gauge
display.
This statistic selected
for usage gauge
display.
Amber
System has crashed
and halted. Error.
NA
NA
Module failed during
operation. Error.
Not running or RPM
below normal range.
Error.
Voltage(s) outside of
normal ranges. Error.
NA
NA
NA
VPN 3000 Concentrator Series User Guide
Off
(Power off. All other
LEDs are off.)
Not connected to
network or not
enabled.
Module not installed
in system.
If installed, module
failed diagnostics or
encryption code is not
running. Error.
NA
Not installed.
Not selected.
Not selected.
Not selected.