Configuration | System | Servers | Accounting | Add Or Modify; Accounting Server; Server Port; Timeout - Cisco VPN 3000 User Manual

To remove a configured user authentication server, select the server from the list and click Delete . There
is no confirmation or undo. The Manager refreshes the screen and shows the remaining entries in the
Accounting Servers
To change the priority order for configured servers, select the entry from the list and click Move ↑ or
Move
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.

Configuration | System | Servers | Accounting | Add or Modify

These screens let you:
Figure 5-13: Configuration | System | Servers | Accounting | Add or Modify screen

Accounting Server

Enter the IP address or hostname of the RADIUS accounting server; e.g., 192.168.12.34 . (If you have
configured a DNS server, you can enter a hostname in this field; otherwise, enter an IP address.)

Server Port

Enter the UDP port number by which you access the accounting server. The default is 1646 .

Timeout

Enter the time in seconds to wait after sending a query to the accounting server and receiving no
response, before trying again. Minimum is 1 second (the default), maximum is 30 seconds.
VPN 3000 Concentrator Series User Guide
list.
↓ . The Manager refreshes the screen and shows the reordered Accounting Servers list.
Add : Configure and add a new RADIUS user accounting server.
Modify : Modify parameters for a configured RADIUS user accounting server.
Configuration | System | Servers | Accounting | Add or Modify
5-13