Vpn Concentrator Type; Refresh; Bootcode Rev; Software Rev - Cisco VPN 3000 User Manual

15
Monitoring

Refresh

To update the screen and its data, click Refresh . The date and time indicate when the screen was last
updated.

VPN Concentrator Type

The type, or model number, of this VPN Concentrator.

Bootcode Rev

The version name, number, and date of the VPN Concentrator bootcode software file. When you boot or
reset the system, the bootcode software runs system diagnostics, and it loads and executes the system
software image. The bootcode is installed at the factory, and there is no need to upgrade it. If an
engineering change requires a bootcode upgrade, only Cisco support personnel can do so.

Software Rev

The version name, number, and date of the VPN Concentrator system software image file. You can
update this image file from the Administration | Software Update screen.

Up Since

The date and time that the VPN Concentrator was last booted or reset.

RAM Size

The total amount of SDRAM memory installed in the VPN Concentrator.

Front Panel

Model The front panel image is an active link. Put the mouse pointer anywhere within the image and click. The
3015–3080 only
Manager displays the Monitor | System Status | LED Status screen.

Back Panel

The back panel image includes active links for configurable modules installed in the VPN Concentrator:
Ethernet interfaces, WAN interfaces, power supplies, and SEP modules. Use the mouse pointer to select
a module on the back-panel image and click anywhere in the highlighted area. The Manager displays the
appropriate Monitor | System Status | Interface , Power , Dual T1/E1 WAN, or SEP screen.
15-10
VPN 3000 Concentrator Series User Guide