Monitor | Routing Table; Refresh - Cisco VPN 3000 User Manual

15
Monitoring
Figure 15-1: Monitor screen

Monitor | Routing Table

This screen shows the VPN Concentrator routing table at the time the screen displays. The IP routing
subsystem examines the destination IP address of packets coming through the VPN Concentrator and
forwards or drops them according to configured parameters. The routing table shows the valid
forwarding paths that the IP routing subsystem knows about, from whatever source: static routes, learned
via routing protocols, interface addresses, etc. However, the table lists only the best routes—based on
metric and type—with duplicates removed.
To configure routing, see the Configuration | System | IP Routing and Configuration | Interfaces screens.
Figure 15-2: Monitor | Routing Table screen

Refresh

To update the screen and its data, click Refresh . The date and time indicate when the screen was last
updated.
15-2
VPN 3000 Concentrator Series User Guide