Wildcard Mask; Add Or Apply / Cancel; Configuration | System | Tunneling Protocols | Ipsec Lan-To-Lan | Add; Local Or Remote Network List - Cisco VPN 3000 User Manual

7
Tunneling Protocols

Wildcard Mask

Enter the wildcard mask for the private remote network. Use dotted decimal notation; e.g.,
0.255.255.255

Add or Apply / Cancel

Add
you are creating new network lists, the Manager automatically displays the appropriate Local or
Remote Network List
Protocols | IPSec LAN-to-LAN | Add | Done
Modify
take effect as soon as you click Apply . If client sessions are using this connection, changes delete the
tunnel—and the sessions—without warning. The Manager returns to the Configuration | System |
Tunneling Protocols | IPSec LAN-to-LAN
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.
To discard your entries, click Cancel . The Manager returns to the Configuration | System | Tunneling
Protocols | IPSec LAN-to-LAN
Configuration | System | Tunneling Protocols |
IPSec LAN-to-LAN | Add | Local or Remote Network List
These screens let you configure and add network lists for the Local Network or Remote Network of a new
IPSec LAN-to-LAN connection. The Manager automatically opens these screens if you select Create new
Network List
screen.
A network list is a list of network addresses that are treated as a single object. See the Configuration |
Policy Management | Traffic Management | Network Lists
On the Local Network List screen, the Manager can automatically generate a network list using the valid
network routes in the routing table for the Ethernet 1 (Private) interface of this VPN Concentrator. (See
Monitoring | Routing Table
A single network list can contain a maximum of 200 network entries.
7-16
. The system supplies a default wildcard mask appropriate to the IP address class.
screen: To add this connection to the list of configured LAN-to-LAN connections, click Add . If
screens. Otherwise, the Manager displays the Configuration | System | Tunneling
screen: To apply your changes to this LAN-to-LAN connection, click Apply . Any changes
screen, and the LAN-to-LAN Connection list is unchanged.
under Network List on the Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN | Add
.)
screen.
screen.
screens also.
VPN 3000 Concentrator Series User Guide