Table of Contents
Advertisement
15
Monitoring
Status
The functional state of this SEP module:
Operational
Not Operational
Cisco Customer Support.
Found
Concentrator finishes initializing, it is an error. Please contact Cisco Customer Support.
Not Found
Customer Support.
Loading
Initializing
Diagnostic Failure
please contact Cisco Customer Support.
DSP Code Version
The version of DSP (Digital Signal Processing) microcode running on this SEP module. This
information may be useful during troubleshooting.
Inbound Hash: Octets / Packets
The number of inbound authentication-only octets (bytes) / packets processed by this SEP. Only hashing
algorithms are applied to authentication-only traffic; there is no encryption or decryption.
Outbound Hash: Octets / Packets
The number of outbound authentication-only octets (bytes) / packets processed by this SEP.
Encrypted: Octets / Packets
The number of encryption-only octets (bytes) / packets processed by this SEP. Only encryption
algorithms are applied to encryption-only traffic; there is no hashing or authentication.
Decrypted: Octets / Packets
The number of decryption-only octets (bytes) / packets processed by this SEP.
Hash Encrypted: Packets
The number of packets that this SEP processed using both hashing (authentication) and encryption
algorithms. This is typical processing for tunneled traffic.
15-22
= module is operating correctly.
= module has failed during operation. This is an error condition; please contact
= module is installed but is not yet operational. If this condition persists after the VPN
= module could not be found. This is an error condition; please contact Cisco
= the system is loading microcode into the SEP module.
= the system is initializing the SEP module.
= module failed during diagnostic testing. This is an error condition;
VPN 3000 Concentrator Series User Guide
Hide quick links:
Advertisement
Table of Contents
