Apply / Cancel - Cisco VPN 3000 User Manual

Apply / Cancel

When you finish setting base-group parameters on all tabs, click Apply at the bottom of the screen to
include your settings in the active configuration. The Manager returns to the Configuration | User
Management
Reminder: To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To discard your settings, click Cancel . The Manager returns to the Configuration | User Management screen.
VPN 3000 Concentrator Series User Guide
= L2TP clients are allowed to use the RSA RC4 encryption algorithm with a 40-bit key. This
40-bit
is significantly less secure than the 128-bit option. Microsoft encryption (MPPE) uses this algorithm.
This option is not checked by default. If you check Required , you must check this option and/or the
option.
128-bit
128-bit = L2TP clients are allowed to use the RSA RC4 encryption algorithm with a 128-bit key.
Microsoft encryption (MPPE) uses this algorithm. This option is not checked by default. If you
check Required , you must check this option and/or the 40-bit option. The U.S. government restricts
the distribution of 128-bit encryption software.
screen.
Configuration | User Management | Base Group
12-15