Smtp Servers; Add / Modify / Delete / Move - Cisco VPN 3000 User Manual

Figure 10-10: Configuration | System | Events | SMTP Servers screen

SMTP Servers

The SMTP Servers list shows the configured SMTP servers in the order in which the system accesses
them. You can configure two prioritized SMTP servers so that you have a backup server in case the
primary server is offline, congested, etc. If no SMTP servers have been configured, the list shows
--Empty--

Add / Modify / Delete / Move

To configure a new SMTP server, click Add . See Configuration | System | Events | SMTP Servers | Add .
To modify a configured SMTP server, select the server from the list and click Modify . See Configuration |
System | Events | SMTP Servers | Modify
To remove a configured SMTP server, select the server from the list and click Delete . There is no
confirmation or undo. The Manager refreshes the screen and shows the remaining entries in the SMTP
Servers
To change the order in which the system accesses configured SMTP servers, select the server from the
list and click Move ↑ or Move ↓ . The Manager refreshes the screen and shows the reordered SMTP
Servers
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.
VPN 3000 Concentrator Series User Guide
.
list.
list.
.
Configuration | System | Events | SMTP Servers
10-19