Configuration | Policy Management | Traffic Management | Network Lists | Add, Modify, Or Copy - Cisco VPN 3000 User Manual

action to take before you can delete the list. Otherwise, there is no confirmation or undo. The Manager
deletes the list, refreshes the screen, and shows the remaining network lists.
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.
Configuration | Policy Management | Traffic Management |
Network Lists | Add, Modify, or Copy
These screens let you:
On the Add and Modify screens, the Manager can automatically generate a network list containing the
private networks reachable from the Ethernet 1 (Private) interface. It generates this list by reading the
routing table, and Inbound RIP must be enabled on that interface.
Figure 13-6: Configuration | Policy Management | Traffic Management | Network Lists | Add,
Modify, or Copy screens
VPN 3000 Concentrator Series User Guide

Configuration | Policy Management | Traffic Management | Network Lists | Add, Modify, or Copy

Add : Configure and add a new network list.
Modify : Modify a previously configured network list.
Copy : Copy a configured network list, modify its parameters, save it with a new name, and add it to
the configured network lists.
13-7