Table of Contents
Advertisement
5
Servers
Server Type = Internal Server
The VPN Concentrator internal authentication server lets you enter a maximum of 100 groups and users
(combined) in its database. To do so, see the Configuration | User Management screens, or click the
highlighted link on the Configuration | System | Servers | Authentication screen.
The internal server has no configurable parameters, therefore there is no Modify screen. If you select the
internal server and click Modify on the Configuration | System | Servers | Authentication screen, the Manager
displays an error message.
You can configure only one instance of the internal server.
Figure 5-6: Configuration | System | Servers | Authentication | Add Internal Server screen
Add / Cancel
To add the internal server to the list of configured user authentication servers, and to include the entry
in the active configuration, click Add . The Manager returns to the Configuration | System | Servers |
Authentication
Reminder:
To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To discard your entry, click Cancel . The Manager returns to the Configuration | System | Servers |
Authentication
Configuration | System | Servers | Authentication | Delete
This screen asks you to confirm your decision to delete the internal authentication server. Deleting it
prevents IPSec LAN-to-LAN connections, since they depend on internally configured groups for IPSec
SA negotiations. Deleting it also prevents connections by all users that are configured in the internal user
database.
We strongly recommend that you not delete the internal authentication server.
Figure 5-7: Configuration | System | Servers | Authentication | Delete screen
5-8
screen. The new server appears at the bottom of the Authentication Servers list.
screen, and the Authentication Servers list is unchanged.
VPN 3000 Concentrator Series User Guide
Hide quick links:
Advertisement
Table of Contents
