Lan-To-Lan Connection; Add / Modify / Delete - Cisco VPN 3000 User Manual

Figure 7-5: Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN screen

LAN-to-LAN Connection

The LAN-to-LAN Connection list shows connections that have been configured. The connections are listed
in the order you configure them, in the format: Name (Peer IP Address) on Interface ; for
example, Branch 1 (192.168.34.56) on Ethernet 2 (Public) . If no connections have been
configured, the list shows --Empty-- .

Add / Modify / Delete

To configure and add a new connection, click Add . See the Configuration | System | Tunneling Protocols |
IPSec LAN-to-LAN | Add
Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN | No Public Interfaces
To modify the parameters of a configured connection, select the connection from the list and click Modify .
See the Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN | Modify screen.
To delete a configured connection, select the connection from the list and click Delete . There is no
confirmation or undo. The Manager deletes the connection, its LAN-to-LAN filter rules, SAs, and group.
The Manager then refreshes the screen and shows the remaining connections in the list.
Caution: Deleting a connection immediately deletes any tunnels—and user sessions—using that connection.
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.
VPN 3000 Concentrator Series User Guide
Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN
screen. If you have not configured a public interface, the Manager displays the
screen.
7-9