Static Routes; Add / Modify / Delete; Configuration | System | Ip Routing | Static Routes | Add Or Modify - Cisco VPN 3000 User Manual

Static Routes

The Static Routes list shows manual IP routes that have been configured. The format is [destination
network address/subnet mask -> outbound destination]
255.255.255.0 -> 10.10.0.2
list as [Default -> default router address] . If no static routes have been configured, the list
shows --Empty-- .

Add / Modify / Delete

To configure and add a new static route, click Add . The Manager opens the Configuration | System | IP
Routing | Static Routes | Add
To modify a configured static route, select the route from the list and click Modify . The Manager opens
the Configuration | System | IP Routing | Static Routes | Modify screen. If you select the default gateway, the
Manager opens the Configuration | System | IP Routing | Default Gateways screen.
To delete a configured static route, select the route from the list and click Delete . There is no
confirmation or undo. The Manager refreshes the screen and shows the remaining static routes in the list.
You cannot delete the default gateways here; to do so, see the Configuration | System | IP Routing | Default
Gateways
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.
Configuration | System | IP Routing | Static Routes |
Add or Modify
These Manager screens let you:
Figure 8-3: Configuration | System | IP Routing | Static Routes | Add or Modify screen
VPN 3000 Concentrator Series User Guide
screen.
screen.
: Configure and add a new static, or manual, route to the IP routing table.
Add
Modify : Modify the parameters for a configured static route.

Configuration | System | IP Routing | Static Routes | Add or Modify

. If you have configured the default gateway, it appears first in the
; e.g., 192.168.12.0/
8-3