Dhcp Servers; Add / Modify / Delete / Move - Cisco VPN 3000 User Manual

Figure 5-15: Configuration | System | Servers | DHCP screen

DHCP Servers

The DHCP Servers list shows the configured servers, in priority order. Each entry shows the server
identifier, which can be an IP address or a hostname; e.g., 192.168.12.34 . If no servers have been
configured, the list shows --Empty-- . The first server is the primary, the rest are backup.

Add / Modify / Delete / Move

To configure a new DHCP server, click Add . The Manager opens the Configuration | System | Servers | DHCP
| Add
To modify a configured DHCP server, select the server from the list and click Modify . The Manager opens
the Configuration | System | Servers | DHCP | Modify screen.
To remove a configured DHCP server, select the server from the list and click Delete . There is no
confirmation or undo. The Manager refreshes the screen and shows the remaining entries in the DHCP
Servers
Note: If you delete a DHCP server, any IP addresses obtained from that server will eventually time out, and
the associated sessions will terminate.
To change the priority order for configured servers, select the entry from the list and click Move ↑ or
Move
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.
VPN 3000 Concentrator Series User Guide
screen.
list.
↓ . The Manager refreshes the screen and shows the reordered DHCP Servers list.
Configuration | System | Servers | DHCP
5-17