Modify; Copy; Delete; Configuration | System | Tunneling Protocols | Ipsec | Ike Proposals | Add, Modify, Or Copy - Cisco VPN 3000 User Manual

7
Tunneling Protocols

Modify

To modify a configured IKE proposal, select it from either Active Proposals or Inactive Proposals and click
this button. See Configuration | System | Tunneling Protocols | IPSec | IKE Proposals | Modify . Modifying an
active proposal does not affect connections currently using it, but changes do affect subsequent
connections.

Copy

To use a configured IKE proposal as the basis for configuring and adding a new one, select it from either
Active Proposals
| IPSec | IKE Proposals | Copy

Delete

To delete a configured IKE proposal, select it from either Active Proposals or Inactive Proposals and click
this button. If an active proposal is configured on a Security Association, the Manager displays an error
message; and you must remove it from the SA before you can delete it. Otherwise, there is no
confirmation or undo. The Manager refreshes the screen and shows the remaining IKE proposals in the
list.
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.
Configuration | System | Tunneling Protocols | IPSec |
IKE Proposals | Add, Modify, or Copy
These screens let you:
Add
Modify
Copy
the configured inactive IKE proposals.
You can configure a maximum of 25 IKE proposals total (active and inactive).
7-22
or Inactive Proposals and click this button. See Configuration | System | Tunneling Protocols
. The new proposal appears in the Inactive Proposals list.
: Configure and add a new inactive IKE proposal.
: Modify a previously configured IKE proposal.
: Copy a configured IKE proposal, modify its parameters, save it with a new name, and add it to
VPN 3000 Concentrator Series User Guide