Email Recipients; Add / Modify / Delete - Cisco VPN 3000 User Manual

To configure default event handling, click the highlighted link that says "Click here to configure general
event parameters." To configure special event handling, see the Configuration | System | Events | Classes
screens.
Figure 10-12: Configuration | System | Events | Email Recipients screen

Email Recipients

The Email Recipients list shows configured event message email recipients in the order they were
configured. You can configure a maximum of five email recipients. If no email recipients have been
configured, the list shows --Empty-- .

Add / Modify / Delete

To configure a new email recipient, click Add . See Configuration | System | Events | Email Recipients | Add .
To modify an email recipient who has been configured, select the recipient from the list and click Modify .
See Configuration | System | Events | Email Recipients | Modify .
To remove an email recipient who has been configured, select the recipient from the list and click Delete .
There is no confirmation or undo. The Manager refreshes the screen and shows the remaining recipients
in the Email Recipients list.
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.
VPN 3000 Concentrator Series User Guide
Configuration | System | Events | Email Recipients
10-21