Community Strings; Add / Modify / Delete - Cisco VPN 3000 User Manual

Figure 9-7: Configuration | System | Management Protocols | SNMP Communities screen

Community Strings

The Community Strings list shows SNMP community strings that have been configured. If no strings have
been configured, the list shows --Empty-- .

Add / Modify / Delete

To configure and add a new community string, click Add . The Manager opens the Configuration | System |
Management Protocols | SNMP Communities | Add
To modify a configured community string, select the string from the list and click Modify . The Manager
opens the Configuration | System | Management Protocols | SNMP Communities | Modify screen.
To delete a configured community string, select the string from the list and click Delete . There is no
confirmation or undo. The Manager refreshes the screen and shows the remaining entries in the list.
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.
VPN 3000 Concentrator Series User Guide
Configuration | System | Management Protocols | SNMP Communities
screen.
9-9