Severity To Email; Severity To Trap; Add Or Apply / Cancel - Cisco VPN 3000 User Manual

Severity to Email

Click the drop-down menu button and select the range of event severity levels to send to recipients via
email. Choices are: None , 1 , 1-2 , 1-3 . The default is None : no events are sent via email.
If you select any severity levels to email, you must also configure an SMTP server on the Configuration |
System | Events | SMTP Servers
| Events | Email Recipients
| System | Events | General

Severity to Trap

Click the drop-down menu button and select the range of event severity levels to send to an SNMP
network management system. Event messages sent to SNMP systems are called "traps." Choices are:
None
If you select any severity levels to send, you must also configure SNMP destination system parameters
on the Configuration | System | Events | Trap Destinations screens.
To configure "well-known" SNMP traps, see Table 10-3 under Severity to Trap for Configuration | System
| Events | General

Add or Apply / Cancel

To add this event class to the list of those with special handling, click Add . Or to apply your changes to
this configured event class, click Apply . Both actions include your entry in the active configuration. The
Manager returns to the Configuration | System | Events | Classes screen. Any new event class appears in the
Configured Event Classes
Reminder: To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To discard your settings, click Cancel . The Manager returns to the Configuration | System | Events | Classes
screen.
VPN 3000 Concentrator Series User Guide
screen, and you must configure email recipients on the Configuration | System
screens. You should also configure the Email Source Address on the Configuration
screen.
, 1 , 1-2 , 1-3 , 1-4 , 1-5 . The default is None : no events are sent as SNMP traps.
.
list.
Configuration | System | Events | Classes | Add or Modify
10-13