Table of Contents
Advertisement
13
Policy Management
Configuration | Policy Management | Traffic Management |
Security Associations | Delete
This screen asks you to confirm deletion of a Security Association that is assigned to a rule in a filter.
Doing so deletes the SA from the VPN Concentrator active configuration, deletes the SA from all rules
that use it, and removes those rules from filters.
Figure 13-12: Configuration | Policy Management | Traffic Management | Security Associations |
Delete screen
Note:
The Manager deletes the SA as soon as you click Yes . If this SA is being used by an active filter, deletion
may affect tunnel traffic.
Yes / No
To delete this SA from all rules that use it, and delete it from the active configuration, click Yes . There
is no undo. The Manager returns to the Configuration | Policy Management | Traffic Management | Security
Associations
Reminder:
To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To not delete this SA, click No . The Manager returns to the Configuration | Policy Management | Traffic
Management | Security Associations
Configuration | Policy Management | Traffic Management |
Filters
This section of the Manager lets you add, configure, modify, copy, and delete filters, and assign rules to
filters.
Filters consist of rules. A filter applies its rules to data packets coming through the system, in the order
the rules are arranged on the filter. If a packet matches all the parameters specified in the rule, the system
takes the Action specified in the rule. If at least one rule parameter does not match, it applies the next
rule; and so on. If no rule matches, the system takes the Default Action specified in the filter.
13-28
screen and shows the remaining SAs in the IPSec SAs list.
screen, and the IPSec SAs list is unchanged.
VPN 3000 Concentrator Series User Guide
Hide quick links:
Advertisement
Table of Contents
