Displaying Snmp Service Policy Statistics - Cisco 4700M Administration Manual

Displaying or Clearing SNMP and Service Policy Statistics
Table 7-12
Table 7-12 Field Descriptions for the show snmp user Command Output
Field
User
Auth
Priv
Group

Displaying SNMP Service Policy Statistics

To display the statistical information of the service policies associated with your SNMP configuration,
use the following show command:
Command
show service-policy policy_name [detail]
Examples
The following examples shows how to display service policy statistics for the
SNMP_MGMT_ALLOW_POLICY policy map:
host1/Admin# show service-policy SNMP_MGMT_ALLOW_POLICY
Status
Description: Allow mgmt protocols
-----------------------------------------
Context Global Policy:
service-policy: SNMP_MGMT_ALLOW_POLICY
Cisco 4700 Series Application Control Engine Appliance Administration Guide
7-58
describes the fields in the show snmp user command output.
Description
String identifying the name of the SNMP user
Authentication of a packet without encryption
Authentication of a packet with encryption
User role group to which the user belongs
Purpose
Displays service policy statistics for a Layer 3 and Layer 4 SNMP
management policy map.
The keywords, options, and arguments are as follows:
policy_name—Identifier of an existing policy map that is currently in
•
service (applied to an interface) as an unquoted text string with a
maximum of 64 alphanumeric characters.
detail—(Optional) Displays a more detailed listing of policy map
•
statistics and status information.
The ACE updates the counters that the show service-policy
Note
command displays after the applicable connections are closed.
: ACTIVE
Chapter 7 Configuring SNMP
OL-20823-01