Setting The Time Out Option; Setting The Default Mode; Setting The Toner Save Mode - Dell 2335dn User Manual

Setting the Time Out Option

You can set the time the printer waits before it restores the default copy or fax settings, if you do not start
copying or faxing after changing the settings on the operator panel.
1. Press Scroll (
2. Press Scroll (
3. Press Scroll (
4. Press Scroll (
The available time options are 15, 30, 60 and 180 (seconds).
You can select from 15, 30, 60 and 180 (seconds). Selecting Off means that the printer does not
restore the default settings until you press Start (
( ) to cancel.
5. Press Select (
6. Press Cancel (

Setting the Default Mode

Your machine is preset to Fax mode. You can switch this default mode to Copy mode or Scan mode.
1. Press Scroll (
2. Press Scroll (
3. Press Scroll (
4. Press Scroll (
5. Press Select (
6. Press Cancel (

Setting the Toner Save Mode

Downloaded from ManualsPrinter.com Manuals
or ) to highlight Setup and then press Select (
or ) to highlight Machine Setup and then press Select (
or ) to highlight Timeout and then press Select (
or ) to display the timeout value you want.
) to save the selection.
) to return to the Standby mode.
or ) to highlight Setup and then press Select (
or ) to highlight Machine Setup and then press Select (
or ) to highlight Default Mode and then press Select (
or ) to display the mode you want.
) to save the selection.
) to return to the Standby mode.
).
).
) to begin copying or faxing, or Cancel
).
).
).
).