Resizing Originals By Entering A Scaling Value (Mac Os X) - Canon imagePROGRAF iPF825 MFP M40 User Manual

7.
Select and click a roll paper in the
8.
Select the width of the loaded roll in the
9.
A
In the Page Size list, click the size of the original as specified in the application. In this case, click ISO A4.
10.
C
Select the Enlarged/Reduced Printing check box.
11.
G
Click ISO A4 in the
12.
F
Click Scaling and enter 120.
Note
• You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom
and right edges of the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in the upper-left corner. In this case, you can center originals by selecting
Layout sheet.
13.
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see " Confirming Print Settings (Windows)

Resizing Originals by Entering a Scaling Value (Mac OS X)

This topic describes how to enlarge originals before printing by entering a scaling value, based on the following example.
• Document: Any Type
iPF825
Enhanced Printing Options
L
Paper Source list.
M
Roll Paper Width list—in this case, ISO A2/A3 Roll (420.0mm).
Paper Size list.
> Printing enlargements or reductions

Resizing Originals by Entering a Scaling Value (Mac OS X)

>
E
Print Centered on the
"
→P.211
3
81