The Printer Stops During A Print Job; An Error Message Is Shown On The Display Screen; The Printer Ejects Blank, Unprinted Paper - Canon imagePROGRAF iPF825 MFP M40 User Manual

Troubleshooting

The printer stops during a print job

An error message is shown on the Display Screen ......................................................................................... 860

The printer ejects blank, unprinted paper ........................................................................................................ 860

An error message is shown on the Display Screen
An error message is displayed during printing.
The last portion of roll paper was used during a print job,
and paper could not be advanced because the trailing edge
is taped to the roll.
The printer ejects blank, unprinted paper
The leading edge of the roll paper
was cut to straighten it.
The Printhead nozzles are clog-
ged.
12
A print job was received from an
incompatible printer driver.
The printer has received print data
that includes HP RTL commands
when Auto Rotate is On.
The printer is damaged.
860
An error message is shown on the Display Screen
> The printer stops during a print job
Status
Status
This operation is normal.
The printer cuts the leading edge of the roll to straighten it and ejects the scraps
when Trim Edge First in the printer menu is On or when Trim Edge First is
Automatic and the leading edge is slanted. The printer is ready to print after this
initial preparation.
When Off is selected under Trim Edge First, the edge is not cut and scraps are
not removed.
Print a test pattern to check the nozzles and make sure the Printhead is in good
condition for printing.
(See "Checking for Nozzle Clogging.")
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
Use the correct imagePROGRAF printer driver for the printer and try printing
again.
Set Auto Rotate to Off before attempting to print again.
(See "Main Menu Settings.")
Contact your Canon dealer for assistance.
>
Check the error message and take action as necessary.
(See " Error Messages
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
(See "Loading and Printing on Rolls.")
Corrective Action
→P.815
→P.730
Corrective Action
.")
→P.886
→P.644
→P.3
→P.813
→P.649
iPF825