Canon imagePROGRAF iPF825 MFP M40 User Manual page 798

Network Setting
6.
In IP Address, enter the IP address assigned to the printer, and then enter the subnet mask in Subnet Mask and the
default gateway in Gateway Address.
7.
Click Set.
8.
Click OK after the Confirmation message dialog box is displayed.
9.
Exit imagePROGRAF Device Setup Utility.
Specifying the Frame Type Using the Printer Control Panel
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Interface Setup, and then press the ▶ button.
10
3.
Press ▲ or ▼ to select NetWare, and then press the ▶ button.
4.
Press ▲ or ▼ to select NetWare, and then press the ▶ button.
5.
Press ▲ or ▼ to select On, and then press the OK button.
Return to the NetWare menu.
6.
Press ▲ or ▼ to select Frame Type, and then press the ▶ button.
7.
Press ▲ or ▼ to select the frame type to use, and then press the OK button.
Return to the NetWare menu.
782
8.
Press ▲ or ▼ to select Print Service, and then press the ▶ button.
9.
Press ▲ or ▼ to select the desired print service, and then press the OK button.
Return to the NetWare menu.
Specifying the Printer's Frame Type
> Network Setting (Windows)
Important
• You must specify the IP address here to be able to configure NetWare protocol settings using Remo-
teUI.
>
iPF825