Insufficient Paper For Job - Canon imagePROGRAF iPF825 MFP M40 User Manual

Paper has been loaded askew, or warped paper has been loaded.
Because the Platen is soiled with ink or other substances, the size
of the clear film cannot be detected.

Insufficient paper for job

The printer has received a print job longer than the amount of roll paper left when
ManageRemainRoll in the printer menu is On and one of the following settings is
selected.
• An option other than Roll Paper (Auto) is selected in Paper Source in the printer
driver.
• During HP-GL/2 printing, GL2 Settings >Paper Source in the printer menu is set
to an option other than Automatic.
iPF825
Cause
Cause
Error Message > Messages regarding paper
Corrective Action
6. If "Not finished printing. Finish printing
remaining jobs?" is shown on the Display
Screen, press the OK button.
Printing will resume, starting from the page
on which the error occurred.
(See "Loading Sheets in the Printer.")
→P.664
Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.")
→P.833
Corrective Action
Press the Online button to re-
sume printing.
However, the roll paper may
run out during the print job
and you may not be able to
print all of the document.
Hold down the Stop button
for a second or more to cancel
printing.
Either change the printer driv-
er Paper Source setting or
the GL2 Settings >Paper
Source setting in the printer
menu or replace the roll with
a roll that has enough paper
for the print job, and then try
printing again.
(See "Removing the Roll
from the Printer.")
(See "Loading Rolls in the
Printer.")
→P.634
Insufficient paper for job
>
13
→P.644
891