Canon imagePROGRAF iPF825 MFP M40 User Manual page 858

Maintenance > Other Maintenance
17.
Close the Top Cover.
11
18.
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
19.
Remove the Stand by reversing the installation procedure, when it was attached to the printer.
20.
842
Disassemble and repackage the Stand by following the installation procedure in reverse.
21.
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a shipping box.
Preparing to Transfer the Printer
>
Important
• Here, the Belt Stopper is the one that was removed and stored after initial installation. Neglecting to
attach the Belt Stopper may damage the printer.
• Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these parts
may damage them.
iPF825