Messages regarding printheads
Cannot adjust printhead. ................................................................................................................................. 905
Cannot adjust band. ........................................................................................................................................ 905
PHead needs cleaning. ................................................................................................................................... 906
Wrong printhead. ............................................................................................................................................. 906
Problem with Printhead ................................................................................................................................... 906
Printhead error ................................................................................................................................................ 906
No printhead .................................................................................................................................................... 906
Execute printhead cleaning. ............................................................................................................................ 907
Cannot adjust printhead.
Cause
The Printhead noz-
zles are clogged.
The Printhead can-
not be aligned; high-
ly transparent film is
loaded.
The Printhead is in-
stalled crooked.
Cannot adjust band.
Cause
The Printhead nozzles are clog-
ged.
iPF825
Execute Auto Head Adj. again, as follows.
1. Press the Online button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
4. Execute Auto Head Adj. again.
(See "Automatic Straightening of Lines and Colors (Auto Head Adj.).")
Press the Online button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjust-
ment.
(See "Automatic Straightening of Lines and Colors (Auto Head Adj.).")
Straighten the Printhead as follows, and then execute Auto Head Adj. again.
1. Press the Online button to clear the error.
2. Use Head Inc. Adj. to adjust the angle of inclination of the Printhead.
(See "Adjusting Line Misalignment (Head Inc. Adj.).")
3. Execute Auto Head Adj. again.
(See "Automatic Straightening of Lines and Colors (Auto Head Adj.).")
Execute Auto Band Adj. again, as follows.
1. Press the Online button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
4. Execute Auto Band Adj. again.
(See "Auto Band Adjustment (Auto Band Adj.).")
Error Message
>
Messages regarding printheads
Corrective Action
→P.813
→P.815
→P.680
Corrective Action
→P.813
→P.815
→P.685
>
→P.676
→P.676
→P.676
Cannot adjust printhead.
13
905