Hp-Gl/2 Jobs Are Printed 6 Mm Larger Than Specified; Hp-Gl/2 Jobs Are Printed At Maximum Size, Even If A Standard Size Is Specified; Hp-Gl/2 Printing Takes A Long Time; The Printer Stops When Printing A Hp-Gl/2 Job (The Carriage Stops Moving) - Canon imagePROGRAF iPF825 MFP M40 User Manual

Troubleshooting

HP-GL/2 jobs are printed 6 mm larger than specified

The page size of the HP-GL/2 print job, as created in the source ap-
plication, is incorrect.

HP-GL/2 jobs are printed at maximum size, even if a standard size is specified

The page size of the HP-GL/2 print job, as cre-
ated in the source application, is incorrect.

HP-GL/2 printing takes a long time.

Large print jobs with a lot of data take longer to print.

The printer stops when printing a HP-GL/2 job (the carriage stops moving)

The printer is analyzing the
print job.
12
878
HP-GL/2 jobs are printed 6 mm larger than specified
> HP-GL/2 problems >
Cause
Cause
Cause
Cause
Either wait a while for printing to resume, or on the printer Control Panel, set Input
Resolution to 300dpi.
(See "Main Menu Settings.")
In MAIN MENU, set PageSizeProcess1 to On.
(See "Main Menu Settings.")
Corrective Action
In MAIN MENU, set PageSizeProcess2 or Conserve Paper to On.
The layout will be changed to the optimal layout.
(See "Main Menu Settings.")
Corrective Action
On the printer Control Panel, set Input Resolution to 300dpi.
(See "Main Menu Settings.")
Corrective Action
→P.730
Corrective Action
→P.730
→P.730
→P.730
iPF825