Selecting The Paper Source - Canon imagePROGRAF iPF825 MFP M40 User Manual

5.
In a crouching position, push the Roll Unit into the printer.
6.
Position the Wheeled Output Stacker by the printer. (See "Using the Wheeled Output Stacker.")
7.
Press the OK button.
The paper is now advanced.
After you load a roll, the printer automatically shows a menu for selection of the type of paper on the Display Screen.
At this point, specify the type of paper. (See "Selecting the Paper Type (Roll).")

Selecting the Paper Source

When advancing paper, press the Feeder Selection button and select the source.
You can determine the selected source by checking which lamp is lit—either the Roll Media lamp (a) or the Cut Sheet
lamp (b).
• Roll Media lamp : Selected when printing on Roll Media.
• Cut Sheet lamp : Selected when printing on Sheets.
iPF825
Handling Paper > Handling rolls
→P.671
→P.642

Selecting the Paper Source

>
7
641